Custom Transfer Decoration Film Manufactured by Yicheng New Materials
Yicheng New Materials Co., Ltd. manufactures Transfer Decoration Film at our 30,000 m² facility in Haining, Zhejiang, where 30+ production lines serve distributors, importers, contractors and project partners across Latin America, Africa and Europe. The film is a heat-transfer decorative surface system: printed on a PET carrier with eco-friendly inks, then released onto a profile under heat and pressure to leave a wood, stone, fabric, solid-colour or antique finish bonded to the surface.
Our range is built for factories that decorate their own profiles rather than for end walls. That shapes every specification we quote: carrier width, ink laydown, release behaviour, colour tolerance and roll build must suit your wrapping or transfer line, your substrate and the finish your market sells. Since 1998 we have produced decorative building surfaces in volume; annual exports of 1,500+ 40HQ containers reflect that production base rather than a single film line.
Where Transfer Decoration Film Fits
Transfer film replaces spray painting and post-lamination where a profile needs a durable printed skin without a separate overlay. It is applied to PVC ceiling and wall profiles, WPC cladding and grille sections, SPC flooring edges and planks, aluminium alloy trims, EPS decorative panels, PU mouldings and square tubes. The finish becomes part of the surface after high-temperature transfer, giving a waterproof, scratch-resistant face that resists fading and cracking in normal interior service.
- Wood grain: oak, walnut, teak and pine effects for ceiling, wall and floor profiles.
- Stone and marble: vein and aggregate patterns suited to SPC, PVC marble panels and trims.
- Fabric and metallic: woven textures and gilded or pearlescent effects for feature profiles.
- Solid colour and antique: matched tones and distressed finishes for brand-specific ranges.
The same film family also supports film-faced wall panels and Wall Panel programmes, so a distributor can source a consistent decor across ceilings, walls and trims from one supplier.
Our Film Range and How Each Type Is Used
Our film family sits alongside the panel and profile ranges, which means we can match a decor to the substrate it will cover. Availability is confirmed per order against the working width and finish required.
| Film type |
Typical substrate |
Application fit |
| Transfer decoration film |
PVC, WPC, SPC, aluminium, EPS, PU |
Heat-transfer finishing of profiles, trims and panels |
| PVC film |
PVC and WPC boards |
Lamination and wrapping where a flexible overlay is used |
| PET film |
Decorative panels and flat surfaces |
Carrier base for printed decor and protective surface layers |
| Printed decor for SPC flooring |
SPC plank and tile cores |
Colour and grain consistency across flooring batches |
Specifications That Drive a Working Quote
A transfer film order is defined by a small set of variables. We confirm each one against your line before production, because a film that transfers cleanly on one wrapper can misregister or leave carrier residue on another.
- Carrier and ink: PET base with eco-friendly inks; ink system selected for the substrate and required opacity.
- Roll format: width, core diameter, roll length and winding direction matched to the transfer unit.
- Transfer window: release temperature and line speed range confirmed on your profile, not only on our reference sheet.
- Finish performance: adhesion, heat resistance, fade resistance and surface hardness checked after transfer.
- Colour control: approved reference sample retained as the batch standard; custom colours matched to swatches or images.
Standard film formats include 1260 × 2440 mm sheet presentation for decorative programmes and roll supply for continuous lines. Other widths and roll builds are confirmed per order rather than assumed.
Substrate and Process Fit
Film performance depends as much on the profile as on the print. PVC and WPC surfaces are smooth and take a clean release; SPC edges need a film that conforms without cracking; aluminium needs a proven pre-treatment before transfer; EPS and PU mouldings need a film with enough ductility to follow relief and corners. We ask for profile drawings and the intended transfer method so the film is specified for the real geometry.
Where a project also needs the decorated product itself, the film programme connects to our PVC Ceiling and SPC Flooring ranges. A single approved decor can then run across ceiling, wall and floor items, which simplifies stock and after-sales handling for distributors.
OEM/ODM and Custom Decoration
OEM and ODM work is the core of this category. We develop a pre-production sample from your specification, colour swatch or reference image, then retain the approved sample as the production standard. Custom colours are matched across a broad colour space; custom patterns range from realistic wood and stone to logo-driven or project-specific designs for branded ranges.
- Custom colour matching for profile ranges and distributor brands.
- Pattern development for wood, stone, fabric, metallic and antique effects.
- Roll width, length and core configuration set to the customer's transfer equipment.
- Export packaging and private-label presentation for distributed film rolls.
- Sampling before mass production, with the approved sample used for batch comparison.
Quality Control and Acceptance
Film is inspected as a surface product, not only as a printed roll. Incoming PET base and ink batches are checked before production; in-process patrol sampling monitors print register, colour and coating weight; finished rolls are checked for appearance, colour consistency and roll integrity. First-batch samples are archived and later batches are compared item by item against them, which is how we hold decor consistency across repeat orders.
Acceptance tests for transfer film typically cover adhesion after transfer, heat resistance, fade resistance, scratch and friction resistance, and conformity over profile edges. Test methods and acceptance limits are agreed with the customer at sample stage, and inspection records or photos can be supplied with finished goods on request. Where a project requires compliance evidence, the applicable documentation is confirmed for the specific film construction and destination market.
Storage, Handling and Serviceability
Transfer film should be stored in its original wrapping, away from direct sunlight and heat sources, in a stable dry environment. Rolls are kept upright or on the specified core support, and partially used rolls should be resealed to prevent dust pickup on the release face. Film is produced to the ordered width, so trimming and splicing on site are avoided where the roll format is confirmed correctly at order stage.
Spare rolls and repeat batches are produced against the retained approved sample, so a distributor can reorder a decor months later without a new colour approval cycle. Technical documents and specification sheets are prepared for distributor sales teams and project partners as part of OEM/ODM support.
Information We Use to Configure Your Solution
We prepare a film proposal from the working point, not from a catalogue page. The following inputs let us confirm construction, format and price without repeated rounds.
| Input |
What it determines |
| Substrate and profile drawing |
Film construction, ductility and edge conformity |
| Transfer method and line speed |
Release behaviour and transfer window |
| Decor reference or swatch |
Pattern development and colour matching |
| Width, core and roll length |
Roll format for your equipment |
| Quantities and delivery schedule |
Production planning and export packing |
| Destination market and labelling |
Packaging, brand presentation and documentation |
Frequently Asked Questions
What substrates can your transfer decoration film be applied to?
The film is made for heat-transfer decoration of PVC, WPC, SPC, aluminium alloy, EPS, PU mouldings, wall panels and square tubes. We confirm the construction against your specific profile and pre-treatment, because aluminium and relief mouldings behave differently from flat PVC board.
Can you produce a custom decor rather than a stock pattern?
Yes. Our OEM/ODM process develops a pre-production sample from a colour swatch, reference image or artwork, then uses the approved sample as the production standard. Custom colours, wood and stone effects, and brand-specific patterns are all part of the programme.
How do you keep colour consistent between repeat orders?
We retain the approved first-batch sample and compare each later batch against it for appearance, colour and texture. Incoming base and ink lots are inspected, and finished rolls are checked before packing.
What roll format can you supply?
Roll width, length, core diameter and winding direction are set to the transfer or wrapping unit. Standard decorative sheet presentation includes 1260 × 2440 mm; continuous-line roll formats are confirmed per order against the equipment drawing.
Do you supply matching panels as well as film?
Yes. We manufacture the panel and profile ranges that the film decorates, including PVC ceilings, wall panels and SPC flooring. A distributor can therefore source the finished decorated product and the film from the same factory with one approved decor.
What do you need to prepare a quotation?
Send the substrate and profile drawing, transfer method and line speed, decor reference, required width and roll length, quantity and delivery schedule, and destination market. With those inputs we confirm film construction, sample timing and export packing scope.